|
|
Media Converter 10b2 Coax To 10bt 100m with Pwr
: :The FlexPoint 10T/2 is a member of the modular FlexPoint converter product family. The FlexPoint product family supports the IEEE 802.3 standard and provides an extensive range of connectivity options across different media.The FlexPoint 10T/2 is a 10Base-T to 10Base-2 converter that converts between twisted pair (UTP) and coax LANs and joins their collision domains. The FlexPoint 10T/2 facilitates the connection of a coax segment to a 10Base-T hub. When using a pair of FlexPoint 10T/2 converters back to back, they connect between two 10Base-T ...
|
|
|
Omnitron Systems 4472-1 2Mbps Fiber Optic Transceiver
: :Omnitron's FlexPoint media converters provide conversion between different cabling types as your wiring needs change. The same unit can be used stand-alone, wall-mounted, rack-mounted, or installed in the power-redundant Powered Chassis. You can mix and match various FlexPoint converters for any size network to deliver reliability and flexibility!The FlexPoint T1/E1 connects T1 and E1 devices, such as PBXs, CSUs and routers, via multimode or single-mode fiber. Designed to extend the standard T1/E1 twisted pair and coax network distances over fiber, this converter provides protection from ...
|
|
|
MEDIA CONVERTER RS-232 TO MM ST
: :- Product Name: Baud Rate Autosensing RS-232 to Fiber Converter - Marketing Information: The FlexPoint 232 is a serial RS-232 to fiber converter, automatically supporting speeds of up to 115,200 baud providing the flexibility to facilitate a wide range of needs and applications.This converter extends the distance of the connection to 2.5 km using multimode fiber. - Product Type: Media Converter Interfaces/Ports - Interfaces/Ports: 1 x DB-9 Female Serial Auto-sensing - Interfaces/Ports: 1 x ST Media and Performance - Connectivity Media: 850 nm Multimode Fiber ...
|
|
|
Omnitron Systems 4341-1 FlexPoint 10/100 Media Converter
: :- Product Name: FlexPoint 10/100 Media Converter - Marketing Information: This FlexPoint 10/100 rate converter is a member of the modular FlexPoint product line. The FlexPoint product line supports the IEEE 802.3 standard and provides an extensive range of connectivity options across different media types. This rate converter features one 10/100 auto-sensing UTP port that adjusts its speed to the speed of the attached device. In addition, this FlexPoint 10/100 automatically negotiates and provides full-duplex or half-duplex capability to maximize network bandwidth. These features allow ...
|
|
|
Omnitron Systems 8240-1 External Modular Expansion Base
: :The iConverter 1-Unit Powered Chassis uses an external AC power adapter. It supports a single iConverter and is not manageable, it allows the implementation of a Plug-In-Module media converter as a stand-alone unit. It is the ideal solution and allows you to purchase just one media converter form factor. It is also ideal in cost sensitive applications where management is not required.The iConverter Chassis supports the entire family of iConverter media converters. Supporting 10, 100, 10/100 and Gigabit Ethernet and OC-3, OC-12 technologies, the iConverter ...
|
|
|
Miconverter 10/100BTX To 100BFX St/sm (1300NM/30KM) Us Pwr
: :The miniature miConverter 10/100 is a rate-switching 10/100 UTP copper to 100Base-Fx fiber media converter that provides cost-effective fiber network extension and connectivity. The miConverter 10/100's Plug-and-Play capability ensures compatibility with network equipment and simplifies fiber-to-the-desktop deployment. The miConverter 10/100 supports a variety of fiber types and offers many power options.The miConverter 10/100's UTP copper port can auto-negotiate by detecting the speed and duplex-mode of the connected device. Upon connection to the UTP device, the UTP port speed adjusts to either 10Mbps or 100Mbps, and ...
|
|
|
Omnitron FlexPoint 100FF - Transceiver - 100Base-LX - SC multi-mode - SC single mode - external - up to 17.4 miles
: :The FlexPoint 100FF Single-Mode to Multimode Fiber Converter is a member of the modular FlexPoint product line. The FlexPoint product line supports the IEEE 802.3 standard and provides an extensive range of connectivity options across different media types. The FlexPoint 100FF Single-Mode to Multimode Fiber Converter provides a cost-effective solution to extend network distances by connecting multimode fiber networks or devices over single-mode fiber cabling.The FlexPoint provides diagnostic data through LED indicators that assist in network installation and maintenance. The LEDs report the availability of ...
|
|
|
ICONVERTER T1/E1; T1/E1 COPPER
: :The iConverter T1/E1 manageable media converter is a member of the modular iConverter product family. It provides T1/E1 Copper to Fiber conversion. The fiber port supports single-mode (SM) or multimode (MM) fiber with distances up to 120km. The RJ45/RJ48 port supports T1/E1, and a DCE/DTE switch eliminates the need for a crossover cable and facilitates connectivity to devices such as PBXs and CSUs.The iConverter T1/E1 features user-selectable Local Loop-Back, Force 1's to Copper, Force 1's to Fiber, and Fiber Optic Test modes to facilitate quick ...
|
|
|
Omnitron ICONVERTER 4TX 4X10/100BTX ( 8480-4 )
: :- Product Name: iConverter Coaxial to Fiber Media Converter - Marketing Information: The iConverter T3/E3 managed media converter 8741-2 is a member of the modular iConverter product family. 8741-2 provides standard T3 (44.736Mbps) or E3 (34.368Mbps) coax to fiber conversion and can be used by telco service providers and enterprise users to connect to devices such as PBXandquot;s, multiplexers, routers and video servers via fiber. - Product Type: Media Converter Interfaces/Ports - Interfaces/Ports: 2 x BNC T3/E3 - Interfaces/Ports: 1 x ST T3/E3 Duplex Media ...
|
|
|
Omnitron 5SLOT ICONV MANAGABLE CHASSIS ( 8220-1 )
: :The 1U (1.75 inch) high, 5-Module Managed Power Chassis can be mounted in a 19-inch or 23-inch rack and features dual hot-swappable redundant power supplies. Universal AC or 48V DC power supplies can be used in any combination. The power supplies operate in load-sharing mode for improved reliability and fault tolerance. When used with the iConverter management module, the power system reports the voltage, current and temperature of each power supply. Any out of range violation can be set to trigger an SNMP management alarm ...
|