|
|
|
Malco TSHD Turboshear Heavy Duty
: :Turbo Shear Attachement, Turns Your Drill Into A Metal Cutting Shear, Heavy Duty Jaws & Gearing Are Suitable For Cutting 18 Gauge Galvanized Steel & Most Other Common Sheet Metals, 20 Gauge Capacity In Sprial Duct & Layered Metal Seams, Fits Most 14.4V Or Larger A/C Or Cordless Drills, Cuts Straight & To Left, Capable Of Navigating Tight Curved Patterns & Square Cuts, Blind Cuts Require A 1' Starting Hole.
|
|
|
Malco SRT2 Straight Handled Siding Removal Tool
: :Straight Handle Siding Removal Tool, Made In USA.
|
|
|
Malco FCG2 1-1/4 Inch Overlap 5/16-Inch Thickness Fiber Cement Siding Gauge, 2-Pack
: :Straight Handle Siding Removal Tool, Made In USA.
|
|
|
Malco FCMS 5-Inch to 8-Inch Exposure Facing Gauge and Overlap Gauge Set
: : Product Description:The Malco FCMS Facing Gauge and Overlap Gauge Set offers two popular tools for fiber cement siding -- a facing gauge and an overlap gauge. The fiber cement facing gauge is used to accurately measure the exposure of the siding and guard against sagging, it can be set to exposures of 5, 6, 7, and 8 inches. This facing gauge is easily adjusted without the need of tools or fasteners, and it can be held with one hand when steadying a new plank for nailing. The facing gauge is ...
|
|
|
Malco TSFC Turbo Shear Fiber Cement Cutting Shear Attachment
: :Turbo Shear Attachment, Easily Chucks Onto Your Own Drill To Create A Fiber Cement Siding Cutting Shear, Navigates For Window & Door Arcs, Fits Most 14.4V Or Larger Cordless Or Standard A/C Power Drills For Easy Operation Anywhere On The Job Site, Wide Skid Plate Design Stabilizes For Precise, Clean Cuts In Fiber Cement Siding & Backerboard Up To 1/2' Thick, Heat Treated High Carbon Steel Blade & Reversible Sid Plate Assures Long Service Life. Product Description:The Malco TurboShear fIber Cement Cutting Shear Attachment turns your power drill into a fiber ...
|
|
|
Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment for 3/8-Inch Drills
: :Turboshear, Inserts Directly Into The Chuck Of A Standard 1200 RPM A/C Or Cordless Drill, It's The Easy Way To Convert Your Power Drill To A Power Shear, With A 20- Gauge Capacity In Galvanized Sheet Metal It Can Tackle Thick Metal Of Equipment Enclosures, Furnace Jacket, & Automobile Body Panel, Jaws Are Replaceable , Requires 2 Hands To Operate, Material Must Be Pre-Set Or Held By Assistant, Shear Cuts To The Left. Product Description:The Malco TurboShear convert your power drill to a power shears. To operate this time-saving tool, simply ...
|
|
|
Malco AV3 Combo Cut Aviation Snip
: :The Crewline Aviation snips make crisp clean cuts in galvanized steel, aluminum, and copper. Use for HVAC, Siding, Roofing, and Gutter work.
|
|
|
Malco TSHDRB Replacement Blade for Malco for TSHD Heavy Duty Sheet Metal Turbo Shear
: :Replacement blades for Malco TurboShear HD (Item# 199610).
|
|
|
Malco MAXCG6 MAX2000 1-1/4-Inch Cut Capacity 10-3/4-Inch Classic Grip Sharp Left Offset Serrated Jaw Aviation Snip
: :The Malco MAXCG6 MAX 2000 Classic Grip Left Cut Snips provides the fit and feel of tradition and features a metal latch, piano wire tension handle spring and a PVC lower grip. The hardened alloy steel blades offer maximum cutting edge life. This superior material flow and low profile allows for maximum maneuverability. The MAXCG6 is designed to handle all the work your HVAC, roofing, siding and gutter jobs can produce.
|
|
|
Malco M2006 MAX2000 Bulldog 1-1/4-Inch Cut Capacity 10-3/4-Inch Left Cut Offset Aviation Snip
: :The Malco MAXCG6 MAX 2000 Classic Grip Left Cut Snips provides the fit and feel of tradition and features a metal latch, piano wire tension handle spring and a PVC lower grip. The hardened alloy steel blades offer maximum cutting edge life. This superior material flow and low profile allows for maximum maneuverability. The MAXCG6 is designed to handle all the work your HVAC, roofing, siding and gutter jobs can produce.
|
|