|
|
|
SURROUND KIT FOR BOSE 301/JBL 116H
: :Don't throw away those expensive JBL or Bose loudspeakers, repair them with these new repair kits from Parts Express! The surrounds in these kits are exact replacements for each particular model, so your JBL or Bose driver will perform as it did when it was new from the factory. Each kit contains supplies to repair two speakers and includes foam or cloth surrounds, plastic shims, two dust caps, 1 oz. of adhesive (specially formulated for various speaker cone materials), 5 foam swabs for application of glue, and complete repair instructions. A utility ...
|
|
|
Speaker Gasketing Tape 1/8' x 1/2' x 50 ft. Roll
: :Finally! A foam gasketing tape designed specifically for loudspeakers! This specially designed foam tape is excellent for making an airtight seal around drivers, terminals, handles, horn lenses, or any other item that needs installed in your cabinet! The closed cell PVC foam is a dark charcoal color that eliminates unsightly bright-colored seams, while the high-tack adhesive aggressively sticks to all speaker frames-- unlike the 'gray stuff' from your hardware store. The 3/8' width can be used on drivers as small as 3'; use the 1/2' width for larger 10's, 12's, 15's, and ...
|
|
|
Pyle PDBT78 2IN Titanuim Super Tweeter
: :Details
|
|
|
SURROUND KIT FOR 8' CERWIN VEGA
: :Do you have an old pair of Cerwin Vegas speakers in the basement with rotten surrounds? Repair them with these new surround kits from Parts Express! The surrounds in these kits are exact replacements for each particular size, so your Cerwin Vega driver will perform as it did when it was new from the factory. Each kit contains supplies to repair two speakers and includes red foam surrounds, plastic shims, two dust caps, 1 oz. of adhesive (specially formulated for various speaker cone materials), 5 foam swabs for application of glue, and ...
|
|
|
Goldwood GT-1005 Wide Dispersion Piezo Tweeter
: :* Similar to KSN1005 * Power handling: 50 watts RMS/75 watts max * Frequency response: 3,500-27,000 Hz * SPL: 94 dB * Manufacturer model number: GT-1005 * Dimensions: Height: 3-1/4', Width: 3-1/4', Depth: 2-1/2'.
|
|
|
PYLE WAVE 1in TWEETER 120W MINI MYLAR DOME
: :- Mylar dome - High density neodymium magnet - Surface and pivot mount system - Integrated crossover system - Frequency response: 2khz-24khz - Spl: 100db @ 1w/1m - Power handling: 120 watts
|
|
|
Screw-on Midrange/tweeter Compression Horn Driver
: :- Midrange/Tweeter Compression Horn Driver - Titanium Diaphragm - 2'' Flat Aluminum Voice Coil - 60 oz. Magnet Structure - Frequency Response: 15kHz-18kHz - Sensitivity: 102dB - 8 Ohm Impedance - 600 Watts Peak Power - Terminals 205-Type - Fits Horns with 1 3 /8'' x 18 TPI Threads
|
|
|
Pyramid TW1193 2-Inch 100-Watt Surface-Mount Tweeter
: :PYRAMID TW1193 2 100-Watt Surface-Mount Tweeter 2' surface-mount Motorola(R) Piezo tweeter; 100W max, 50W RMS; Low distortion; Lightweight; Freq resp: 5 kHz30 kHz; Sensitivity: 88 dB; .75' mounting height; Includes mounting hardware and wires; Clamshell packaging 2 100-Watt Surface-Mount Tweeter
|
|
|
Pyle PDB252 250W Midrange Tweeter Compression Driver
: :Pyle PDB252 250 Watt Midrange Tweeter Compression Driver
|
|
|
Goldwood GT-25 4' Cone Tweeter
: :This tweeter features a hard paper cone, treated paper surround, and metal dust cap. Flat high frequency response to 20,000 Hz. * Power handling: 35 watts RMS/50 watts max * Nominal impedance: 8 ohms * Fs: 1,500 Hz * Frequency response: 3,000-20,000 Hz * Magnet weight: 3 ozs. * SPL: 90 dB 1W/1m * Net weight: 1/2 lb. * Dimensions: A: 4', B: 3', C: 1-1/16', D: 2-3/8', E: 1/2'.
|
|
