|
|
Tang Band 13-1264SA 1/2' Textile Tweeter
: :This tweeter is based on the traditional mlyar dome tweeter, but is a vast improvement thanks to its coated fabric diaphragm and neodymium motor. The result is a low-cost tweeter with great top octave extension without the typical mylar dome sizzle. Great as a replacement for stock tweeters or for use in inexpensive multimedia systems. Solder pad terminal connections. Specifications: *Power Handling: 3.5 watts RMS/50 watts max *VCdia: 1/2' *Impedance: 8 ohms *Re: 7.0 ohms *Frequency range: 3,000-20,000 Hz *Fs: 2,300 Hz *SPL: 92 dB 2.83V/1m *Dimensions: A: 2-3/8' square, B: 1-1/2', ...
|
|
|
SURROUND KIT FOR 9' ADVENT
: :Use this foam surround kit to repair the extremely popular Advent 9' woofers of the early to mid 1970s. Each kit contains supplies to repair two speakers and includes two foam surrounds, six plastic shims, two dust caps, a plastic bottle filled with 1 oz. of specially formulated adhesive, 5 foam swabs for application of glue, and complete repair instructions.
|
|
|
3.75'' Aluminum Bullet Titanium Horn Tweeter
: :Pyle Dryver Pro high-dispersion bullet type speakers provide clear imaging of audio program material over a wide range of frequencies and dynamic ranges. Several sizes and specifications are offered ensuring you of an appropriate choice for your application. All models feature a die-cast aluminum frame, high-temperature ferrofluid cooled voice coil and includes crossover capacitor. * Power handling: 60 watts RMS/120 watts max * Voice coil diameter: 1' * Impedance: 4 ohms * Frequency response: 2,000-25,000 Hz * Magnet weight: 20 oz. * SPL: 93 dB 1W/1m
|
|
|
Dayton ND16FA-6 5/8' Neodymium Dome Tweeter
: :Don't let the low price fool you! This versatile tweeter is a huge step above the average 'budget' tweeter. Conceived with line array thoughts in mind, it is finally possible to achieve the inter-driver spacing needed to minimize comb filtering out to nearly 20 kHz. But their uses don't stop at line arrays-- they have the sensitivity, smoothness, and power handling to individually do a two-way with most small woofers. Give them a try for your next budget or micro speaker-- you will be pleasantly surprised! Specifications: *Power handling: 10 watts RMS/20 ...
|
|
|
Diesel Audio Super High Frequency Tweeter Kit NS-119TW
: :This pair of tweeters works with existing radio, no amplifier needed. They fit in most places, very easy to install. Tweeters include 2 self adhesive pads, 2 support clips and 2 mounting screws.
|
|
|
Bullet Horn Super Tweeter Pair Black
: :Specifications: *Power handling: 60 watts RMS/120 watts peak *VCdia: 1' *Impedance: 4 ohms *Frequency response: 2,000-25,000 Hz *SPL: 93 dB 1W/1m *Magnet weight: 20 oz. *Dimensions: 3-3/4' diameter x 1-1/2' depth.
|
|
|
1'' Soft Dome Tweeter
: :1 Soft Dome Tweeter High Compliance Response 20 oz. Circuit Magnet 1 Aluminum Voice Coil Ferro Fluid Enhanced 120 Watts Peak Power Frequency Response: 2k-20kHz 4 Ohms Impedance Complete Pair in Gift Box Includes Compensation Capacitors
|
|
|
2'' Satelite Tweeter
: :2 Satellite Tweeter Tweeter Can be Removed from Case for Flush Mounting Super Polymer Diaphragm 4 Ohms Impedance 10 oz. Magnet Structure 50 Watts RMS/100 Watts Peak Power Ferro Fluid Enhanced Sensitivity: 93dB Frequency Response: 5k-22kHz Crossover Capacitor Network Installed
|
|
|
4 Way DJ Tweeter System
: :- Four 3'' Horn Piezo Tweeters - Quick Connect Terminals - Built In Crossover Network 5KHz - Power Handling: 150 Watts RMS/300 Watts Peak - Frequency Response: 4kHz-27kHZ - Sensitivity (1w/1m): 97 dB - Impedance: 8 Ohms - Dimensions: 20.84''W x 6''H x 9.85''D - Weight: 11 lb.
|
|
|
Pyle Pro PDB512 Bolt-On Tweeter Driver with 30 oz. Magnet
from: PylePro
: :- Midrange/Tweeter Compression Horn Driver - Titanium Diaphragm - 2.02'' (51.2mm) Flat Aluminum Voice Coil - 30 oz Magnet Structure - Frequency Response: 500Hz - 18kHz - Sensitivity: 107dB @ 1W/1M - 8 Ohm Impedance - 250 Watts RMS/500 Watts Peak - Terminals 205 Type - Fits Horns with Three M6 Threaded Holes 120º Apart on 2.24'' (57mm) Diameter Circle, Two M6 Threaded Holes 180º Apart on 3'' (76.2mm) Diameter Circle
|