Editorial Review:

Product Description:
Convert wireless signals into powerline X10 signals. This multiple device RF base works with X10's line of RF remote controls and PIR motion sensors. Wireless X10 devices need this base unit to catch the radio signals and convert them to X10 signals on the electricity line. Add as many handheld remotes and X10 wireless devices as you want to each base. As long as the transmitters are on the same house code as the base, they will all control the same devices. Be careful to have only one RF base unit or X10 security console (which also change RF signals into X10 signals for the electricity line) per housecode. If more than one base unit is used on the same housecode, X10 signal collisions may result. The expandable RF Base includes a built-in appliance module which responds to unit codes 1 under the chosen house code. The appliance module can be controlled by wireless control or from another hardwired X10 transmitter. Like other Appliance Modules, it too is rated for 500 watts incandescent, 1/3 HP motor loads, and 15 amps resistive load (like a space heater.)

---

Related Items:
     see more

Related Items:

• X10 10-Button Credit Card Remote
• X10 LM465 Lamp Control Module
• X10 AM466 Appliance Module
• X10 HR12A 16 Device Palm Pad Remote Control for X10 Receivers
• X10 EagleEye Motion Detector, MS14A-C
• see more

---

Rating: - Loud, Don't always work


They work good enough for most applications, but don't work everywhere in the house all the time. X10 is known to not work in everyroom with every plug. You might find it doesn't work for plug far away from switch. Loud click noise during switch is not too classy.

---

Rating: - Replacement revives system
I have owned an x10 set for remote lamp operation for many years. Recently, the plug-in base was damaged and I ordered a new one from Home Automation. Delivery was quick. I am now controlling lights from anywhere in my home. Highly recommended.